dirna Bergstrom bycool COMPACT 3.0 Manual Del Usuario página 10

COMPACT 3.0
EN
Función F0 - Manual Operation of the equipment, at intermediate power.
P0 Manual Operation , Maximum power.
F0
; the user can choose the comfort temperature and change the speed of the unit
blower manually. If the engine is running or the engine starts running, the unit will
automatically change onto the
NOTE: This P0 , function cannot be selected manually . It is activated automatically by
the unit. When the motor is stopped, this function can also be activated automatically by
the unit, if the unit detects that the batteries are fully charged. The unit will remain in this
mode for a while and then it will change onto the selected F0 mode.
The comfort temperature is controlled by briefly pressing the
59/80º F).
Blower speeds are controlled by holding down the
will appear on the display:
Function F1 - Digital thermometer function.
In this function, the Compact 3.0 N&D will indicate on the screen the temperature inside the
cabin.
Function F2 - Time Programming Function.
F2 programmes the unit to disconnect automatically during a period of time between 1
and 9 hours. To programme it, keep the On/Off
screen, select the operating time with the
.
Function F4 Automatic Operation of the Unit, at intermediat power
p4 Automatic Operation of the unit at maximum power
When selecting F4 the symbol CA will appear on the display alternating between the
selected temperatures. The user can choose the comfort temperature manually. With
this function, the unit regulates automatically its performance parameters until the cho-
sen comfort temperature is achieved. If the engine is running or the engine starts
running, the unit will automatically change onto the P4 mode within a short period
of time.
P0
mode within a short period of time.
V1 V2 V3 V4
, , ,
10
Air conditioning for vehicles
keys, the following symbols
V5
, .
pressed until F2 appears on the
keys and confirm by pressing On/Off
keys (15/ 27 ºC-