Levoit LUH-M101S-WEUR Manual Del Usuario página 9

USING YOUR SMART HUMIDIFIER
Note: Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 11).
1. Plug in the humidifier. The indicators on
the display will light up for 1 second, then
turn off.
2. Tap to turn your humidifier on. The
humidifier will start misting.
Note:
•
During first use, the humidifier may take
10–25 seconds to start misting.
•
If there is no water in the tank,
flash 10 times, and the humidifier will
turn off. Fill the water tank (see Getting
Started, page 7).
3. Tap repeatedly to cycle through mist
settings: Low, Medium, and High.
4. Rotate the nozzle to adjust the direction
of the mist. [
Figure 3.1
Note:
•
Direct the nozzle away from any furniture,
walls, or other objects to prevent them
from getting wet.
•
Do not inhale the mist directly from the
nozzle.
5. Optionally, use the controls or the VeSync
app to turn on Auto Mode, activate Sleep
Mode, and more (see Controls, page 6).
will
Low Mist
Medium Mist
High Mist
]
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it off.
A comfortable humidity level is between
40–60%.
Note: You can also set the humidifier to
automatically stop misting when the room
reaches a specific humidity level (see Auto
Mode, page 9).
7. Tap to turn your humidifier off.
Auto Mode
Auto Mode uses the humidifier's sensor to
automatically adjust the mist level to maintain
a target humidity level. The default target
humidity level is 60%.
1. Tap to turn Auto Mode on.
Note: The humidifier will automatically mist for
15 seconds after being turned on, even if the
room has reached the target humidity level.
2. By default, Auto Mode uses Automatic
Stop. The humidifier will stop misting
when the highest target humidity level is
reached (default 60%).
Note:
•
In the VeSync app, you can turn Automatic
Stop on/off.
•
If Automatic Stop is off, the humidifier will
keep running on low mist level when the
highest target humidity level is reached.
3. The humidifier will continue detecting
the humidity level in the room. It will start
and stop misting again according to the
following table:
EN
9