Axis Q1615-E Mk II Guia De Instalacion página 11

Installation Guide
This Installation Guide provides instructions for installing AXIS Q1615-E Mk II Network Camera
on your network. For other aspects of using the product, see the User Manual available at
www.axis.com
Installation Steps
1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 11.
2. Study the product overview. See Product overview on page 12
3. Study the specifications. See page 19.
4. Install the hardware. See page 21.
Package contents
• AXIS Q1615–E Mk II Network Camera
• 4–pin I/O connector block for connecting external devices
• 2–pin RS485/422 connector block (x2)
• Wall mount
• Torx screwdriver T20
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key
Optional Accessories
For information about available accessories, including power accessories and outdoor housings
see www.axis.com
AXIS Q1615-E Mk II Network Camera
11
EN