Axis Q1615-E Mk II Guia De Instalacion página 18

AXIS Q1615-E Mk II Network Camera
Buttons
Control button
For location of the control button, see Product overview on page 12.
The control button is used for:
• Resetting the product to factory default settings. See page 27.
• Connecting to an AXIS Video Hosting System service. To find out more about this
service, see axis.com
Function button
Note
Focus assistant is only valid for optional P-iris, DC-iris or manual iris lenses.
The function button has multiple functions:
• Leveling assistant – This function helps to ensure the camera is level. Press the button
for about 3 seconds to start the leveling assistant and press again to stop the leveling
assistant. The status LED and buzzer signal assist leveling of the camera, see Status LED
behavior and buzzer signal for leveling assistant on page 16. The camera is level when
the buzzer beeps continuously.
• Focus assistant – This function is used for enabling the focus assistant. To enable the
focus assistant, press and very quickly release the button. Press again to stop the focus
assistant.
18