Publicidad
Idiomas disponibles
Idiomas disponibles
Network Agency (Bundesnetzagentur)
and VDE, a standard household socket
is not suitable for connecting a balcony
PV system. An inlet socket, installed by
a qualified electrician, is required.
An inlet socket is included with your device.
-
A qualified electrician shall check
the power circuit and circuit breakers
to ensure the house installation is
compatible with the PV system.
-
Registration with your local power
supplier is required. Please contact
your local supplier for details.
-
Registration with the Federal Network
Agency's market master data
register (Marktstammdatenregister) is
mandatory. Please visit https://www.
marktstammdatenregister.de/MaStR for
details.
Individual requirements from your rental
agreement or building code may apply.
General Description
The illustrations can be found on
the front foldout page.
Extent of the delivery
- PV balcony power plant
- Instruction manual
Overview
1
Solar panel
2
2x hook
3
2x long bolt TX M6x65
4x short bolt TX M6X16
6x nut M6
4
2x clamp with bolt M8x30
2x nut M8
2x bolt TX M10X20
2x headless screw TX M10X20
5
2x thin sheet
6
2x solar panel clamp unit
7
Rail guide
8
Inlet socket with installation
frame
9
AC cable：L, N, PE =1.0mm
10 Inverter
11 Screw kit for attaching the
inverter to the solar panel
- 2x bolt TX M8X20
- 2x spring washer M8
- 2x flat washer M8
- 2x nut M8
12 Screw kit for attaching the
inverter to the rail
- 2x bolt TX M6X16
- 2x washer M6x30
- 2x nut M6
2
19
Publicidad
