Publicidad
Idiomas disponibles
Idiomas disponibles
• Keep the airflow passage open. Check
each assembly area in REMOVING
CLOGS (page 17) occasionally for clogs.
Turn off and unplug vacuum cleaner
from outlet before checking.
SUGGESTED SWEEPING PATTERN
For best cleaning action, the floor nozzle
should be pushed straight away from you
and pulled straight back. At the end of
each pull stroke, the direction of the floor
nozzle should be changed to point into the
next section to be cleaned. This pattern
should be continued across the carpet with
slow, gliding motions.
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
This could cause sparking and damage
the electrical contacts or electronic
controls.
ATTACHMENT STORAGE
This vacuum cleaner is equipped with
onboard attachment storage. The bare
floor brush is stored in the canister, and the
dusting brush and crevice tool are stored
VACUUMING TIPS
NOTE:
complete cleaning.
FLOOR NOZZLE STORAGE
The wand has a U-shaped storage hook
that slides into the U-shaped slot on the
canister. The storage hook allows the
wands and floor nozzle to be stored with
the canister to conserve storage space.
The canister must be stored on end for this
feature to be used.
ATTACHMENTS
in the attachment holder on the wand. See
ATTACHMENT USE TABLE on page 15.
- 13 -
Fast, jerky strokes do not provide
Storage
Hook
Slot
Publicidad
