Kenmore 23010 Manual De Uso Y Cuidado página 20

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed. Do not operate without filter
cover installed.
EXHAUST FILTER - HEPA MEDIA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as it
will lose its dust trapping ability.
NOTE:
See REPLACEMENT PARTS for
part number and purchase details (page 6).
1. Push latch up to release the exhaust
filter cover from slot in canister.
2. Pull filter cover and outward to remove it
from filter chamber in the canister.
3. Remove the exhaust filter cartridge from
the filter cover.
EXHAUST FILTER CHANGING
4. Insert the new exhaust filter cartridge
into the filter cover with the rubber seal
upward.
5. To replace the exhaust filter cover, insert
the two tabs on the cover into the slots
at the top of the filter chamber.
6. Rotate filter cover down until it snaps
into place.
- 20 -