Publicidad
Idiomas disponibles
Idiomas disponibles
Review this table to find do-it-yourself solutions for minor performance problems. Any
service needed, other than maintenance described in this Use & Care Guide, should be
performed by a qualified service agent.
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM
Unplugged at wall outlet.
Vacuum cleaner
Tripped circuit breaker/blown
fuse at household service panel.
will not start.
Loose hose electrical connections. Reconnect hose ends.
Full or clogged dust bag.
Clogged airflow passages.
Dirty filters.
Poor job of dirt
Wrong power level selected.
pick-up.
Hole in hose.
Worn floor nozzle.
Canister hood open.
Hose or hood electrical
Vacuum cleaner
connections.
starts but shuts
Tripped thermal protector in
off.
canister.
Full or clogged dust bag.
Dirty filters.
CHECK BAG
Indicator
Blocked airflow passage.
activates.
Certain attachment tools.
TROUBLESHOOTING
POSSIBLE CAUSE
Plug in firmly, press On/Off switch.
Reset circuit breaker or replace fuse.
Change bag.
Clear airflow passages.
Clean/change filters.
Adjust control.
Replace hose.
Change floor nozzle.
Close and latch hood.
Check connections, reconnect hose ends.
See THERMAL PROTECTOR (page 16).
Change bag.
Clean/change filters.
Clear blockage from airflow passage.
This is normal. The indicator will turn to green
when tool is removed.
- 21 -
SOLUTION
Publicidad
