Publicidad
Idiomas disponibles
Idiomas disponibles
Tap and Die Set | titanium nitride | M6 - M24
M6 x 0.75
M6 x 1.0
M8 x 1.0
M8 x 1.25
M10 x 1.25
M10 x 1.5
M12 x 1.5
M12 x 1.75
M14 x 1.5
M14 x 2.0
TOOLS
1 die holder
1 reducing ring for dies
1 tap holder
1 T-holder for taps
20 tap, titanium nitride
20 die, titanium nitride
1 slot screw driver
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
SAFETY NOTES
•
Keep children and other unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Do not use the tool if parts are damaged.
•
When working with this tool, always wear safety glasses.
•
Always add a little cutting oil when cutting the thread.
ENVIRONMENTAL PROTECTION
Recycle undesired materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in an environmentally friendly manner.
Check with your local waste disposal authority about recycling measures.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1899
M16 x 1.5
M16 x 2.0
M18 x 1.5
M18 x 2.5
M20 x 1.5
M20 x 2.5
M22 x 1.5
M22 x 2.5
M24 x 1.5
M24 x 3.0
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
