SOMFY Sunea 40 RTS Instrucciones página 7

Sunea 40 RTS DC
2.2.1.Wiring with connectors
1] Wire the 4-pin drive connector (i) to the 4-pin
cable Y connector (j).
2] Wire the 2-pin cable Y connector (k) to the 2-pin
battery connector (m).
3] Wire the 4-pin cable Y connector (o) to the 2-pin
solar panel connector (p).
2.2.2.Wiring without connectors
2.2.2.1. Wiring with a solar panel and a battery
Wire the drive to a 12V NiMH battery (q) and a 12V
solar panel (r), following the figure:
- N = Blue wire
- L = Brown wire
The wires must have a minimum diameter of
2
0.75 mm .
NOTICE
Battery specifications:
Output current: 5 A at 12V (starting current: 7 A during 400 ms with a voltage drop of 2V max.).
2.2.2.2. Wiring with an external power supply
Wire the drive to an external 12V DC regulated
power supply (s) with a fuse (t), following the figure:
- N = Blue wire
- L = Brown wire
The wires must have a minimum diameter of
2
0.75 mm .
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
o
i j
q
N
N
L
L
N
N
L
L
t
EN
p
k m
r
s
7