Sony FWD-S55H2 Manual De Instrucciones página 67

Using the PAP Setting
The inset picture is shown within the main picture. You can change the position and size of the inset picture.
You can also access the "PAP Setting" in the "Screen" settings (page 28).
Use a video input connector other than VIDEO IN for displaying Picture in Picture (PinP).
Notes
• A composite video signal from the VIDEO IN connector does not support PinP.
• A high resolution input signal may not support PinP.
Change the resolution of main picture (A) if the PinP is not displayed properly.
Press G/g button.
Press
Tips
• The cursor indicating the active picture will disappear after 5 seconds.
• 2 sizes of inset picture can be selected.
The inset picture (B) is
shown within the main
picture (A).
The inset picture (B)
becomes the active
picture.
button.
The position of the
inset picture (B) will
change.
Press F button.
Cursor showing active picture
The size of the inset picture
(B) will become large.
Press f button.
The size of the inset picture
(B) will become small.
GB
19
GB