Publicidad
Idiomas disponibles
Idiomas disponibles
Disconnect the plug from the power outlet before performing any cleaning and maintenance
operation.
Clean the appliance and accessories after each use.
Only clean the device when it is cold.
Cleaning of the appliance must be carried out with a soft and slightly damp cloth.
Do not use excessively wet substances, liquids or cloths, because any infiltration could
damage the appliance irreparably.
Do not use chemical solvents, abrasive sponges or abrasive products to clean the oven or
accessories.
Do not use abrasive sponges to clean the appliance.
NEVER SOAK THE UNIT IN WATER.
Appliance exterior
Clean the outside of the appliance with a warm, damp cloth.
Interior Walls and Door
Clean the inside walls of the oven and the door after each use, after the appliance has completely cooled
down, with a damp non-abrasive sponge. Do not leave the inside of the oven wet.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as they can
scratch the surface, causing the glass to shatter.
Grill (14), rotisserie fork (15), rotisserie (16), drip tray (17), rotating basket (18)
Wash these parts with everyday dishwashing detergents. Do not wash in the dishwasher.
Interior light.
To replace the internal bulb, contact an authorised service centre.
Problem
Possible cause
E1
The internal temperature has
reached its maximum temperature.
E2
No sensor contact.
E3
Sensor breakage.
The display does
1-The device is not connected to a
not come on
power source.
2- The display screen is detached.
The interior light
1- The light is damaged.
does not come
2- Bad contact.
on
The fan does not
1- The fan is damaged.
work
2- Bad contact.
The buttons do
Malfunctioning or damaged circuit
not respond
board.
The device does
1- The device is not connected to a
not work
power source.
2- The fuse has tripped.
(EN) CLEANING AND MAINTENANCE
(EN) TROUBLESHOOTING
Solution
Turn off the device and open the door to let the
internal cavity cool down for 10 minutes.
If the problem persists, contact a service
centre authorised by the manufacturer.
Contact a service centre authorised by the
manufacturer.
Contact a service centre authorised by the
manufacturer.
1- Make sure the device is plugged in.
2- Contact a service centre authorised by the
manufacturer.
Contact a service centre authorised by the
manufacturer.
Contact a service centre authorised by the
manufacturer.
Contact a service centre authorised by the
manufacturer.
1 -Make sure the device is plugged in.
2- Contact a service centre authorised by the
manufacturer.
21 / 64
Publicidad
