Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
CAUTION: Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns,
unplug the pump and allow time for it to cool after periods of extended use.
Do
When the power is disconnected, inspect the
pump suction screen and remove all debris,
then plug the pump back into the grounded
(GFCI) outlet.
To clean a pump clogged with debris:
Unplug the pump from electrical power.
Unscrew the stainless screws, and remove the volute/bottom seal plate.
Use a flathead screwdriver to hold the shaft, then turn the impeller counterclockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.
Gasket
Volute
Stainless
screw
SPA02501TDK/SPA03301TDK/
SPA05001TDK/SPA02501VDK/
SPA03301VDK/ SPA05001VDK
6
Shaft
Impeller
SPI05004VDK/SPI07504VDK/
SPI10004VDK/SPI05004TDK/
SPI07504TDK /SPI10004TDK
Do Not
Do not disassemble the motor housing. This motor
has NO repairable internal parts, and disassembly
may cause leakage or dangerous electrical wiring
issues.
Do not lift up the pump by the power cord.
Stainless screw
Shaft
Impeller
Volute
For Professional Technical Support call 1-844-242-2475
Shaft
Impeller
Gasket
Bottom
seal plate
Stainless screw
SPS03301VDK/SPS05001VDK/
SPS07501VDK/SPS03301TDK/
SPS05001TDK /SPS07501TDK
Publicidad
