Publicidad
Cord Hooks
Crochets de
rangement
du cordon
Sujetadors
del cordón
Wand
"J" Slot
Tube
Fente en "J"
Tubo
Ranura en "J"
Raised Tab
Saillie
Lengüeta
saliente
Power Cord
Retainer (Plug Head)
Agrafe (fiche du cordon)
Clavija
Power Cord
Cordon d'alimentation
Cordón electrico
Tool Storage
Hose
Tuyau
Manguera
Combination Brush
Suceur combiné
Cepillo para combinación
Attachment
Holder
Porte-accessoires
Sostenedor de
la conexión
Wand
Tube
Tubo
Crevice Tool
Suceur plat
Herramienta
para hendiduras
➢ ➢ Wrap power cord around cord hooks.
➢ ➢ Secure retainer (plug head) to power
cord.
➢ ➢ Remove any shipping tape from the
dust or belt cover.
➢ ➢ Attach wand to hose by aligning the
two (2) raised tabs on wand with "J"
slots in hose, guide tabs along
grooves, twist to lock in place.
➢ ➢ Loop hose over hose holder on front
of handle.
➢ ➢ Insert wand in holder, push and twist
firmly onto connector pipe to assure
a good connection.
➢ ➢ The attachment holder provides
convenient storage for tools.
➢ ➢ To attach holder to vacuum, insert
upper tab into slot next to the On-Off
switch, and push down firmly.
➢ ➢ Store other wand, with dusting brush
on top, in round slot of attachment
holder.
➢ ➢ Place crevice tool into rectangular
slot of attachment holder.
➢ ➢ Refer to PARTS IDENTIFICATION
section for tool location.
- 14 -
Publicidad
