Publicidad
Idiomas disponibles
Idiomas disponibles
3
M18™ 500GB Control Hub
6. Check that the Wireless Monitor or tablet running the Milwaukee
App is connected to the Control Hub by Wi-Fi. If it is not connected, you will need to
connect it.
7. Insert the USB thumb drive containing the firmware update into the Control Hub's
USB-A port.
8. Turn the navigation dial to Settings
9. Turn the navigation dial to System Update, press the navigation dial to enter the
submenu.
Screen Settings
Date & Time
Units
Feet
Language
English
System Update
Factory Reset
About
Service & Support
10. Select Control Hub and press the navigation dial. The filename of the update should
be seen in this window. Press the navigation dial to begin the update.
Control Hub
Wireless Monitor
Select Control Hub
11. Read and acknowledge the warning message by selecting OK.
MANAGE JOBS
2019/05/10 6 FILES
Settings
Selecting OK will run a firmware update on the
Control Hub. Please do not interrupt the update
process after it has started.
Cancel
, press the navigation dial.
Settings
MTCam_hub.bin
The firmware update is shown
OK
56
®
Pipeline Inspection
Settings
Publicidad
