4 MAINTENANCE
The method of maintenance to be carried out by the user
consists of cleaning the cover. All other operations should be
carried out by authorised agents or by personnel qualified in
the service of instruments.
4.1 Cleaning recommendations
Do not use scented hydrocarbons or chlorides solvents.
Such products may attack the materials used in the
construction of the cover.
The cover should be cleaned by means of a light solution
of detergent and water applied with a soft cloth.
Dry thoroughly before using the system again.
4.2 Internal fuses which user cannot replace
The following fuse must be replaced by authorized
personnel:
F1
0.5 A
SLOW 125 V SMD
11/06
CAUTION
- 12 -
RP-080