Publicidad
Idiomas disponibles
Idiomas disponibles
3. Boost or attenuate the selected
band with the 5/∞ buttons.
The display shows "+6" – "–6".
Note:
• If you make adjustments when a curve other than "CUSTOM" is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with "CUSTOM" appears on the display
while selecting the equalizer curve. (Refer to page 28.)
Equalizer Curve Fine Adjustment
You can adjust the center frequency and the Q factor (curve characteristics) of each cur-
rently selected curve band (EQ-Low/Mid/High). Adjusted equalizer curve settings are
memorized in "CUSTOM".
Level (dB)
Center frequency
1. Press the AUDIO button for 2 seconds to select Equalizer Curve Fine
Adjustment.
2. Press the AUDIO button to
select the desired band for
adjustment.
3. Select the desired frequency
with the 2/3 buttons.
Low: 40 + = 80 + = 100 + = 160 (Hz)
Mid: 200 + = 500 + = 1k + = 2k (Hz)
High: 3.15k + = 8k + = 10k + = 12.5k (Hz)
4. Select the desired Q factor with
the 5/∞ buttons.
2N + = 1N + = 1W + = 2W
Note:
• If you make adjustments when a curve other than "CUSTOM" is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with "CUSTOM" appears on the display
while selecting the equalizer curve. (Refer to page 28.)
Q=2N
Q=2W
Frequency (Hz)
"
"
30
Publicidad
