cecotec Cumbia POWER MATIC-CCINO 8000 TOUCH BIANCA Serie Manual De Instrucciones página 39

ENGLISH
after the milk function is used.
Assemble the steam tube as shown in picture 2.
Press OK start the automatic cleaning of the milk system.
Fig. 35
Warning: During the cleaning process, the steam tube and the coffee outlet will emit hot water
and steam. Do not disassemble or remove any of these 2 elements before the cleaning cycle
has finished.
Cleaning the brewing unit
Enter the menu and press the CLEANING icon.
Press the BREWING UNIT icon to start the cleaning cycle.
Press the PLAY icon to rinse the brewing unit.
Add the cleaning agent to the brewing unit through the ground coffee funnel.
Press the PLAY icon to start the cleaning cycle of the brewing unit.
When the process has been completed, the machine will switch back to standby mode.
Fig. 36
Cleaning the brewing unit (2)
Open the right-side door.
Remove the residues tank.
Remove the brewing unit and rinse it with hot water too.
Insert the brewing unit back in its position. Wait until it clicks into place, and ensure it is
properly assembled.
Fig. 37
Warning: The milk tank, the water tank, the residues tank and the drip tray are dishwasher safe.
Descaling
Enter the menu and press the CLEANING icon.
Press DESCALE.
Fill the water tank with fresh water and add some descaling product.
Press the PLAY icon to start the descaling function.
The descaling solution will be dispensed.
Once all the water has been used, the machine will finish the descaling process.
Remove the water tank and fill it again. The machine will start running the rinsing cycle.
When the process has been completed, the machine will switch back to standby mode.
Fig. 38
Note: The water tank is suitable and compatible with the Cecotec Matic-ccino filter, which
guarantees properly filtered water for a better maintenance, a longer service life of the coffee
maker and better coffee flavour. For perfect results, we suggest you to change the filter
39
POWER MATIC-CCINO 8000 SERIE BIANCA / NERA