cecotec Cumbia POWER MATIC-CCINO 8000 TOUCH BIANCA Serie Manual De Instrucciones página 40

ENGLISH
regularly, at least every 2 months, for full effectiveness.
Filter not included
Rinse
Enter the menu and press the CLEANING icon.
Press the RINSE icon to start the rinsing cycle.
When the process has been completed, the machine will switch back to standby mode.
Fig. 39
Cappuccinatore
Enter the menu and press the CLEANING icon.
Press the CAPPUCCINATORE icon.
Assemble the steam tube as shown in picture 4.
Press OK start the automatic cleaning of the milk system.
When the process has been completed, the machine will switch back to standby mode.
Fig. 40
Cleaning the grinding unit
Enter the menu and press the Cleaning icon.
Press the Grinder cleaning icon.
Take out the brewing unit.
Place a container in the brewing unit's gap (where the cleaning residues are collected).
Press Play.
Empty the coffee bean tank and pour in grinder cleaning product. Once it is poured, press Play.
While the grinder is operating, the display will show "Cleaning grinder". When it has finished
moving, the display will return to the "Place a container" screen.
Press Play until there is no more cleaning product in the tank (do not add any more cleaning
product) and no more rests flow out into the container places in the brewing unit's gap. When
there are no more rests press icon to return back.
Fig. T
Place the brewing unit in its position again and close the door.
Fill the coffee bean tank with coffee beans. Brew 2 espresso coffees and throw them away.
You can now use your mega-automatic coffee maker again.
Blocked brewing unit
If the right-side door is opened before the brewing unit return movement has stopped, the
main gear could stop spinning causing the brewing unit to block in its position due to a bad
position.
When this happens and the brewing unit cannot be removed, turn the coffee maker off from
the panel, switch it off and unplug it from the power supply. Then, turn the machine back on
40