Husqvarna BS 75 Manual Del Usuario página 22

Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
WARNING:
attach the blade guard before transportation
of the product. Use protective gloves with
Kevlar. The blades are very sharp.
CAUTION:
behind a vehicle.
The wheels let you move the product manually for
shorter distances. Refer to
the wheels BS 75 on page 22 and To transport the
product on the wheels BS 110 on page 22 .
For longer distances, lift the product to move it or put the
product on a vehicle. Refer to
23 and To attach the product to a transportation vehicle
on page 24 .
• Be very careful when you move the product
manually or on surfaces with a slope. Small slopes
can result in a strong movement that is not possible
to brake by hand.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
To transport the product on the wheels
BS 75
WARNING:
Kevlar. The blades are very sharp.
1. Disconnect the power supply.
22
Transportation, storage and disposal
Be careful during
Remove the blade or
Do not tow the product
To transport the product on
To lift the product on page
Use protective gloves with
2. Attach the blade guard.
3. Disengage the drive wheels. Refer to
disengage the drive wheels on page 12 .
4. Push the product slowly.
To transport the product on the wheels
BS 110
1. Disconnect the power supply.
2. Remove the blade, refer to
page 19 .
WARNING:
with Kevlar. The blades are very sharp.
3. Tilt the product until the foot support and the handle
are on the floor.
To engage and
To replace the blade on
Use protective gloves
1804 - 003 - 28.08.2023