Publicidad
Idiomas disponibles
Idiomas disponibles
(oontinuedJ
, Make sure end of drain hose is correctly inserted
and secured to drain facility.
• Avoid extended
soaking - Soak for 30 minutes
or!es s.
, Av0id 0ver!oading,
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• Make sure temperature
selection is correct.
• Make sure hoses are connected
to correct faucets
and inlet connections.
Be sure water supply is regulated
correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a mininlum
120 ° F (49 ° C) hot water at the tap. Also check water
heater capacity and recovery
rate.
• Disconnect
hoses and clean screens. Hose filter screens may be plugged.
Publicidad
