Publicidad
Idiomas disponibles
Idiomas disponibles
ttOW lO USE
USING THE CONTROLS
AUTO CLEAN
To turn the AUTO CLEAN function
on, press the
AUTOCLEAN button while the air conditioner
is
c_+_
SAVER mode. This function
can only be selected from the
remote ;it is not available from
the control panet.lt must be set
each time you wish to run the AUTO CLEAN
function.
AUTOCLEAN is used to remove moisture from
the heat exchange coils. This helps prevent the
formation
of mildew and odors.
ATo
use AUTO CLEAN
With the air conditioner
running in COOL,
DRY or ENERGYSAVER mode, press the
AUTO CLEAN button.
• Jb "AUTO CLEAN" will be displayed
in the
LCD diplay.
Press the POWER button to turn the air
cond itioner off.AUTO CLEAN will run
the circulation
and exhaust fans with the
compressor
off for a few minutes after
the power is turned off.
To cancel AUTO CLEAN, or to stop an
AUTOCLEANcycle in process, simply press
the AUTO CLEAN button again. The AUTO CLEAN
function will not operate if the air conditioner
is
already off.
AUTO SW/NG
AUTO SWING function can only be activated with
the remote. When this function is on, the air
Auto
Swing
remote again.
discharge will oscillate to
circulate air more evenly
through the room. To turn this
function off, simply press the
AUTO SWING button with the
With AUTO SWING off, you may also manually
adjust the air discharge to the desired position.
It will maintain this position until the air
cond itioner is turned off or AUTO SWING
is activated.
oC =*F
°C=°F function
can only be activated with the
oc=oF
remote.When
the displayed
temperature
is °C(of °F),you
can press this button to swith
to °F(or °C).
Publicidad
