Publicidad
Idiomas disponibles
Idiomas disponibles
iNslAilaliON iNslRUcliONs
iNSTALLATiONiN VERTICAL SLiDiNG WINDOWS
NOTE: The WindoW installation
kit can be used with vertical sliding windows between
18"
and 48" wide.
<
Foam seal C
type-shorter)
(Adhesive type)
Cut the foam seal A(adhesive type) &
C(adhesive type-shorter)to
the proper
length, and attach it to the window sash and
frame.
Extension panel
_L(_required)
|
T-------_
v_____ent
I
/
/
-
Insert the vent panel assembly, including
extension
panels, if needed, into the window
opening.
Extend the extension
panels, if
used.
....
JJ
Carefully lower the window.
Secure the vent
panel in place with 4 type A screws, plus
one screw for each extension:
Vent panel only:
Vent panel and
one extension:
Vent panel and
two extensions:
4 type A screws
5 type A screws
6 type A screws
Two vent panels and
two extensions:
9 type A screws
Foam seal B
on-adhesive type)
Cut the foam seal B(Non=adhesive type) to
the window width. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
O16
Publicidad
