CARE AND CLEANING 39
REMOVING
AND
REPLACING
THE
OVEN
DOOR
AND
DRAWER
CAUTION
. The door is very heavy. Be careful when removing
and lifting
the door.
. DO NOT lift the door by the handle.
. DO NOT hit the glass with
pots, pans, or any other
object.
, Scratching,
hitting,
jarring
or stressing
the glass
may weaken its structure,
causing an increased
risk
of breakage
at a later time.
Replacing
fhe
oven
door
1. Firmly grasp both sides of the door at the top.
Hinge
arm
Bottom
edge
of slot
Removing
fhe
oven
door
Fully open the door. Pull the hinge locks down
toward
the door frame, to the unlocked
position.
A
tool, such as a small fiat-blade
screwdriver,
may be
required.
Slot
Hinge lock
Hinge arm
Door frame
2.
With the door at the same angle as the removal
position,
seat the indentation
of the hinge arm into
the bottom
edge of the hinge slot. The notch in the
hinge arm must be fully seated into the bottom
of
the slot.
Slot
Hinge lock
Hinge arm
Push hinge locks up to lock
2.
Push hinge locks down to unlock
Firmly grasp both sides of the door at the top.
Close the door to the removal
position
(approxi-
mately five degrees) which is halfway between
the
broil stop position
and fully closed.
About
5°
3.
4.
Fully open the door. If the door will not fully open,
the indentation
is not seated correctly
in the bottom
edge of the slot.
Push the hinge locks down against
the front frame
of the oven cavity to the locked position.
Close the
oven door.
Removal
Position
3. Lift the door up and out until the hinge arm is clear
of the slot. Put the door on the floor.