Peavey KB 100 Guía De Operación página 3

ENGLISH
®
® ©
|
1 2 3 4
LOW Z (1)
LEVEL CONTROL (3)
Controls the channel volume.
HIGH Z INPUT (4)
LEVEL CONTROL (5)
Controls the channel volume.
NOTE: Channel 3 functions are same as channel 2.
PRE EQ PATCH (6)
LOW EQ (7)
LOW/MID EQ (8)
An active tone control (peak/notch,
+15 dB) that varies the low/mid frequency range.
HIGH/MID EQ (9)
An active tone control (peak/notch, +15 dB) that varies the high/mid frequency range.
HIGH EQ (10)
MASTER EFFECTS (1D
Determines the overall effects level supplied to the internal reverb unit.
POWER LED (12)
Illuminates when AC power is being supplied to the amp.
GROUND SWITCH (13)
tion. There may be some situations when audible hum and/or noise will come from the loudspeaker. If this
situation arises, position the ground switch to either positive or negative ( + or -) or until the noise is minimized.