Oster XPERT PRO Manual De Instrucciones página 14

LE ARN I N G A B O U T YOUR A PPLIA NC E
Filler Cap – 2 oz / 60 ml filler cap doubles as a measuring cup.
1.
Align notch with the hole to insert in lid; turn clockwise to secure in place.
Remove from lid to add ingredients while blending.
Lid (Flap goes on opposite side of pour spout) – Seals the jar.
2.
Jar & Blade Assembly – 8 cups BPA-free plastic jar with permanently attached
3.
blade assembly.
Control Panel – Includes speed dial, 3 programmed settings and pulse.
4.
Power Cord – 3-prong power cord.
5.
Fuse – Incorporated to protect the motor from overheating.
6.
If the motor shuts off while in use:
Please refer to the instructions in the section "Sistema Avanzado de Protección
de Motor"
7. Cord Storage – Space on the bottom of the base to store the cord while not in use.
8. Tamper – After blending has started, remove the filler cap and place the tamper
through the opening in the lid to assist with pushing the food down to the blade.
NOTE: the tamper is not long enough to reach the blade.
Before you use the product for the first time, separate the Tamper, Lid, Filler
Cap, and Jar. Wash in warm, soapy water. Rinse and dry well.
En gl ish -4