Descargar Imprimir esta página

cecotec BOLERO SQUAD I 3200 Manual De Instrucciones página 70

Placa de inducción

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
ENGLISH
If the cable is damaged, it must be replaced by the manufacturer, the supplier, or qualified
-
personnel to avoid hazards.
If the appliance is connected directly to the mains, a single-pole residual current circuit
-
breaker with a minimum contact separation of 3 mm must be installed.
The person in charge of the installation must ensure that a correct electrical connection
-
has been made and that it complies with safety regulations.
-
Do not bend or press the cord.
-
Check the cord for damage regularly.
Brown > Brown cable phase
Black > Black cable phase
Blue > neutral, blue cable phase
Grey > Grey cable phase
Green Yellow > Ground, green - yellow cable
Using the touch icons:
The icons react to touch, so there is no need to apply any pressure.
-
Use the base of your finger, not the tip.
-
-
You will hear a beep every time the hob detects a finger.
-
Make sure the icons are always clean and dry and that no objects (for example, a utensil
or a cloth) are covering them. Even a thin layer of water can hinder the proper operation
of the touch icons.
Icon description:
Number
Reference
1
2
3
70
BOLERO SQUAD I 3200
Description
On/off: switch on or off the appliance.
Child lock: press the icon once and the appliance will
lock. The other icons will not work if the child lock is
activated. To unlock, press the icon for some seconds.
Slider: increases or reduces the power level.

Publicidad

loading