Charging Battery - Trevi FLEX 50 Manual De Usuario

To store photos, videos, and music should insert a micro SD external memory.
• Carefully remove the back cover.
• Insert the microSD card keeping the surface with the electrical contacts facing down
(display side).
• Replace the back cover.
Notes:
• Some card brands may not be compatible with the phone. The use an incompatible
memory may be damaged or the card memory itself.
• The appliance only supports memory formatted in FAT. If you enter formatted cards
differently the phone will ask you to reformat the memory card.
CHARGING THROUGH POWER SUPPLY:
1. A device turned off, connect the Micro USB plug of the supplied cable to the Micro
USB phone (to use the supplied cable only).
2. Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet.
3. The device will turn on for a few seconds to show the battery icon with it is charging.
4. When the battery is fully charged (the icon is no longer moving), disconnect the power
supply from the wall outlet and then disconnect the plug from the Micro USB phone.
3. Inserting the micro SD card

4. Charging battery

32