Manual Rinse Cycle - Gaggia Milano NAVIGLIO HD8749 Manual De Instrucciones

4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 9
5 The " " and " " buttons flash during the entire process.
6 Wait for the cycle to finish automatically.
Note: You can stop the dispensing process by pressing either the "
button.
7 When the above steps are complete, check that the "
buttons are lit.

Manual rinse cycle

During this process a coffee is brewed and fresh water flows through the steam/
hot water circuit. This takes a few minutes.
1 Place a container under the dispensing spout.
2 Check that the " ", "
3 Press the " " button. The machine starts dispensing water.
4 When dispensing has finished, empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with step 5.
5 Insert a container under the Classic Milk Frother.
", " " and " " lights are flashing steadily.
ENGLISH
9
" or the " "
", " ", " " and " "
03/12/2018 12:33:08