Preparing For Use; Machine Packaging; Machine Installation - Gaggia Milano NAVIGLIO HD8749 Manual De Instrucciones

ENGLISH
6
1
2
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 6

Preparing for use

Machine packaging

The original packaging has been designed and constructed to protect the machine
during transport. We recommend keeping the packaging material for possible
future transport.

Machine installation

1 Remove the drip tray with grill from the packaging.
2 Remove the machine from the packaging.
3 For best use, it is recommended to:
- Choose a safe, level surface, where there will be no danger of overturning the
machine or being injured.
- Choose a location that is sufficiently well-lit, clean and near an easily reachable
socket.
- Allow for a minimum distance from the sides of the machine as shown in the
figure.
4 Insert the drip tray with grill into the machine. Make sure it is fully inserted.
Note: The drip tray collects the water that comes out of the dispensing spout
during each rinse/self-cleaning cycle, as well as coffee that might be spilled during
beverage preparation. Empty and wash the drip tray daily and each time the full
drip tray indicator is raised.
Caution: NEVER remove the drip tray when the machine has just been turned on.
Wait a couple of minutes for the machine to carry out a rinse/self-cleaning cycle.
5 Remove the water tank.
03/12/2018 12:33:04