Manual Rinsing Cycle; Using The Machine - Gaggia Milano VIVA STYLE Instrucciones De Uso

Manual rinsing cycle

1 Rinse the water tank. Fill the water tank with fresh water up to the MAX indication (Fig. 4).
2 Place the water tank back into the machine and push it downwards until the reference marks are
visible (Fig. 5).
3 Place a container under the classic milk frother and turn the hot water/steam knob anticlockwise
(Fig. 6).
4 Turn the selection knob to the coffee position (Fig. 8).
- Let the machine dispense water until the water tank is empty.
5 Turn the selection knob back to standby position (Fig. 9).
6 Fill the water tank with fresh water up to the MAX indication.
7 Insert the pressurized filter holder into the brew unit from below (Fig. 11).
8 Turn the filter holder from left to right as far as possible and release the filter holder grip. The
handle will automatically jump back to the left again (Fig. 12).
9 Place a container under the filter holder (Fig. 13).
10 Turn the selection knob to the coffee position (Fig. 8).
- Let the machine dispense water until the water tank is empty.
11 When the water tank is empty, turn the selection knob back to the standby position (Fig. 9).
12 Fill the water tank with fresh water up to the MAX indication and wait until the 'machine ready'
light lights up.
13 Turn the filter holder from right to left to remove it from the brew unit and rinse it with fresh water
(Fig. 14).
The machine is ready for use.

Using the machine

Note: Clean the coffee pod filter and coffee pod adapter every time you have used it.
Brewing coffee with ground coffee
Warning: To prevent the risk of burns, do not turn the pressurized filter holder to remove
it during brewing.
1 Preheat the pressurized filter holder before the first coffee brewing.
2 Insert the filter holder into the brew unit from below (Fig. 11).
3 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will jump back to the left slightly.
4 Turn the selection knob to the coffee position until some water flows out of the coffee dispensing
openings (Fig. 8).
5 Brew one cup of water. Turn the selection knob to the standby position to stop brewing (Fig. 9).
6 Turn the filter holder from right to left to remove it from the machine and pour out the remaining
water (Fig. 15).
Note: Remove any coffee residues from the rim of the filter holder.
7 Use the measuring scoop to put the ground coffee into the pressurized filter holder.
-
To brew one cup of coffee, add 1-1.5 measuring scoops of ground coffee.
- To brew two cups of coffee, add 2 measuring scoops of ground coffee (Fig. 16).
Gaggia Viva WEU_export_30029_72.indd 11
English
11
21/12/2018 10:55:48