Using The Machine For The First Time; Circuit Priming; Automatic Rinse/Self-Cleaning Cycle - Gaggia Milano NAVIGLIO HD8749 Manual De Instrucciones

ENGLISH
8
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 8

Using the machine for the first time

When using the machine for the first time, the following activities need to happen:
1 You need to prime the circuit.
2 The machine will perform an automatic rinse/self-cleaning cycle.
3 You need to initiate a manual rinse cycle.

Circuit priming

During this process, fresh water flows through the internal circuit of the machine
and the machine warms up. This takes a few minutes.
1 Insert a container under the Classic Milk Frother.
2 Press the " " button to start the cycle. The machine starts the automatic
priming of the circuit by dispensing some water through the Classic Milk
Frother.
3 When the process is complete, the"
machine is in the warm-up mode.

Automatic rinse/self-cleaning cycle

When warm-up is completed, the machine automatically performs a rinse/self-
cleaning cycle of the internal circuits with fresh water. This takes less than a
minute.
4 Place a container under the dispensing spout to catch the small amount of
dispensed water.
" and " " buttons will flash. The
03/12/2018 12:33:07