Publicidad
Idiomas disponibles
Idiomas disponibles
Renfert GmbH
8
Controls
6
5
Illustration 3: Controls
1 Start/Stop button, switch ultrasonic cleaning on/off
2 LED indicator for temperature
flashes green – for the duration of heating mode to reach the set temperature. Heating is on.
lights up green – once the set temperature is reached. Heating switches off once the set
temperature is reached.
flashes red or orange – there is a fault, see Chapter Malfunctions/fault messages [} 21].
3 Rotary knob for temperature 0 – 80°C
the temperature of the cleaning liquid can be set from 30–80 °C in 5 °C increments.
0 = Heating off
4 Mode button, set the dyn (dynamic) or eco ultrasound mode;
with LED indicators of the ultrasound modes dyn and eco, the LED indicator of the set ultra-
sound mode lights up.
5 Rotary knob cleaning duration
ON/OFF, switch the unit on/off;
set a cleaning duration of 1, 2, 3, 4, 5, 10, 15, 20, 25 or 30 minutes.
6 LED indicator for cleaning duration
flashes green – for the duration of ultrasonic cleaning,
lights up green – when ultrasonic cleaning is complete,
flashes red – there is a fault, see Chapter Malfunctions/fault messages [} 21].
Easyclean TEC
4
Controls
1
2
3
13 / 24
Publicidad
