Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the unit
CAUTION
Dry running!
Damage to the tank and unit.
Ø Always fill the tank with fluid up to the fill level marking before operating the unit.
Ø Never operate the unit without cleaning fluid.
Ø Regularly monitor the filling level.
There are two options for setting the cleaning duration for ultrasonic cleaning:
• Ultrasonic cleaning in continuous operation, cleaning duration rotary knob ON:
Ultrasonic cleaning can be started or stopped at any time by pressing the Start/Stop button.
Important! In the ON (continuous operation) rotary knob position, the cleaning duration automatically
stops after a maximum of 6 hours.
• Timed ultrasonic cleaning operation, cleaning duration rotary knob 1–30 minutes:
Ultrasonic cleaning stops automatically after the set time or at any time by pressing the Start/Stop
button.
12.1 Set the cleaning duration
The unit is ready to use.
The unit is filled with liquid.
The cleaning agent has been metered and added, if applicable.
The liquid is degassed.
The objects to be cleaned have been inserted.
The unit is covered with the cover.
Turn the cleaning duration rotary knob to ON to switch on the unit for up to 6 hours.
Alternatively, turn the cleaning duration rotary knob directly to a time of 1, 2, 3, 4, 5,
10, 15, 20, 25 or 30 minutes to switch on the unit for a specific cleaning duration.
The LED indicator of the ultrasound mode ready for operation lights up.
The heating system begins heating up the cleaning liquid if a temperature is set. The
LED indicator for heating flashes green.
The LED indicator for heating is off if a temperature is not set. The temperature rotary
knob is set to 0.
The cleaning duration is set. The cleaning duration stops automatically after the set
time.
18 / 24
Renfert GmbH
Easyclean TEC
Publicidad
