Publicidad
Idiomas disponibles
Idiomas disponibles
FRIDGE DOOR
The side to which the refrigerator door opens can be altered on the
right side to the left, if the place of installation so requires.
Remove the screws (6) securing the top cover (7) and remove it.
Remove the two screws (1) securing the right upper hinge (5) to
the structure and remove.
Lift the door and place it on a padded surface to prevent
scratching.
Remove the two screws (8) securing the lower hinge (2) and
remove.
Remove the front foot (4) and pass to the right side.
Before inserting the lower hinge (2) remove the plug (9) and
reverse the direction of the lower hinge. Then install the lower
hinge (2) on the left side of the lower structure with two screws
(8).
Fit the plug (9) in the lower hinge (2).
Place the door in the correct position ensuring that this is
supported on the lower hinge (2).
Keeping the door in the closed position secure the upper hinge (5)
on the left side of the upper structure with two screws (1).
Remember not to tighten the screws (1) until the top of the door is
level with respect to the upper structure.
Install the top cover in the part above the apparatus using the
screws (6).
42
Publicidad
