Bosch Professional GSH 14 C Manual Original página 13

Additional Safety Instructions
Use suitable detectors to determine if utility lines are
u
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Tool data logging is enabled in this tool.
Wireless connectivity tool with built-in
®
Bluetooth technology
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The machine is intended for heavy chiselling and demolition
work as well as for driving in and compacting with the appro-
priate accessories.
With the built-in Bluetooth® Low Energy Module, power tool
data and settings are transferred between the power tool
and a mobile device by means of Bluetooth® wireless techno-
logy.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle (insulated gripping surface)
(2) On/off switch
(3) User Interface
(4) Auxiliary handle (insulated gripping surface)
(5) Knurled nut for auxiliary handle
(6) Dust protection cap
(7) Tool shank
(8) Locking sleeve
(9) Power tool status indicator (user interface)
(10) Button to select the working mode (user interface)
(11) Working modes indicator (user interface)
(12) Maintenance indicator (user interface)
Technical Data
Demolition hammer
Article number
Rated power input
Impact rate
Number of chiselling posi-
tions
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Tool holder
Lubrication
Weight according to EPTA-
Procedure 01:2014
Protection class
Data transfer
English | 13
GSH 14 C
3 611 C44 0..
W 1750
-1
min 1900
6
J 28
mm 22
Grease lubrication
kg 14.6
/ II
1 609 92A 7FT | (12.01.2023)