Bosch Professional GSH 14 C Manual Original página 16

16 | English
Working mode (11) indic- Functions
ator
Both indicators light up In the High-power working mode, the power tool works with maximum performance.
Bottom indicator lights up In the Low-power working mode, the power tool works with approx. 80 % of its maximum
performance.
Top indicator flashes 3 x when The High altitude working mode is activated (activation via app), the High-power mode will
pressing the working mode
be deactivated automatically.
button (10)
Working Advice
The power tool with built-in Bluetooth
u
Module GCY 301‑42 is equipped with a radio inter-
face.
When working, hold the power tool by the handle (1) with
both hands. The handle (1) can move upwards and down-
wards around its axis. This has a damping effect against vi-
brations.
For the highest possible impact damping, work only with
moderate pressure.
Sharpening Chisels
Only sharp chiselling tools will produce good results, there-
fore sharpen your chiselling tools in good time before use.
This will ensure a long service life for the tools and good
work results.
Resharpening
Grind chiselling tools against sanding discs, e.g. aluminium
oxide, under a steady stream of water. Take care that no an-
nealing colouration appears on the cutting edges; this im-
pairs the hardness of the chiselling tools.
60
4
60
20
To forge a chisel, heat it to between 850 and 1050 °C (pale
red to yellow).
To harden a chisel, heat it to approx. 900 °C and quench in
oil. Then, leave it in an oven for approx. one hour at 320 °C
(annealing colour: pale blue).
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
1 609 92A 7FT | (12.01.2023)
Installing and Setting up the App
®
You will need to install the device-specific app before you
Low Energy
can use the connectivity functions.
– Download the app from the corresponding app store
App name
– Bosch Toolbox
– Bosch BeConnected
– Then select the MyTools or Connectivity sub-item in the
– The display of your mobile device shows you all of the
Data transfer via Bluetooth®
The built-in Bluetooth
regular intervals. Depending on ambient conditions, multiple
60 transmission intervals may be required before the power
tool is detected. If the power tool is not detected, check the
following:
– Is the distance to the mobile device too great?
– Switch Bluetooth® off and on again on your mobile device.
Functions in Conjunction with the Power Tool
In conjunction with the Bluetooth
module GCY 301‑42, the following connectivity functions
are available for the power tool:
– Registration and personalisation
– Status check, output of warning and error messages
– General information and settings
– Management
You can find further information in the Help menu in the app.
Maintenance and Service
Android 6.0 (and newer)
iOS 11 (and newer)
Maintenance and Cleaning
u
(Apple App Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
Android
iOS
app.
subsequent steps required to connect the power tool to
the mobile device.
®
Low Energy Module sends a signal at
Reduce the distance between the mobile device and the
power tool.
Check whether the power tool has now been detected.
®
Low Energy
Pull the plug out of the socket before carrying out any
work on the power tool.
Bosch Power Tools