Therabody TheraFace Mask Guia De Inicio Rapido página 5

Automatic Shut Off
If the device is not manually powered off by long pressing the LED or vibration
button, the device will automatically shut off after each treatment (LED +
vibration, 9-minute treatment; vibration only, 15-minute treatment).
Basic getting started steps:
1. Begin with a clean, dry face
2. Slide the TheraFace Mask eyeshield into the mask through the
protrusions that meet near the nose. Use of the eyeshield is optional.
Using the eyeshield can reduce strain on the eyes from the light.
If you choose not to use the eyeshield, keep your eyes closed
throughout your treatment. Do not look into LED lights during
treatment. *Normal use of TheraFace Mask eyeshields may result in
redness around your eye area. Some redness is normal and should
subside within 5-10 minutes of using TheraFace Mask.
3. Place the device on your face, and adjust both of the Velcro straps to
your desired fit
4. To turn on the device, either Long press the LED button (G) to turn
ON LED light + vibration, or the vibration button (H) to turn ON
vibration only
5. Short press the vibration button (H) or LED button to toggle through
each vibration mode (Continuous, Breathing, and Wave)
6. Enjoy your desired treatment.
*Normal use of TheraFace Mask increases blood flow throughout your face, which may result in redness
around your forehead, temples, and bottom of your eyes. Some redness is normal and should subside
within 5-10 minutes of using TheraFace Mask.
Adjust
Adjust EN
4 4