Carat P Serie Instrucciones página 20

CAUTION!
Risk of injury by flying clippings or tool parts!
- Failure to wear appropriate protective equipment,
working with open diamond blade¬ guard or with
inappropriate diamond blades may lead to heavy injuries.
- Wear protective goggles.
- Only work with diamond blade guard closed.
- Only work with diamond blades, specifically designed for
the material to be cut.
CAUTION!
Risk of injury by pinching in movable parts!
Failure to wear appropriate protective equipment may lead
to heavy injuries.
- Wear protective gloves.
- Lock the cutter head.
- Lock the guiding bridge.
- Always fix the cutting table with transport lock
(for table saw machines).
DANGER!
Danger to life from electric current!
Touching live parts leads to death. Damaged insulation or
individual components can be life-threatening.
Disconnect the machine from the power supply before
any work on the electric system. Verify that the system is
disconnected from power supply.
- Switch off ¬power supply before maintenance, cleaning
and repair operations and secure the machine against
being restarted.
- If the power supply insulation is damaged, switch off
immediately and arrange for repairs.
- Never bypass or disable fuses.
- Always use fuses with correct amperage when replacing
defective fuses.
- Keep moisture away from live parts.
- Any works on the electrical installations must be carried
out by qualified electricians.
CAUTION!
Risk of burns on hot surfaces.
- Contact with hot parts may cause burns.
- Do not touch the surface.
- Before every work, make sure that the parts have cooled
down to the ambient temperature.
CAUTION!
Danger of injuries caused by special physical
effects
Failure to wear appropriate protective equipment
may lead to heavy injuries. Wear ear protectors. Wear
protective gloves. Take adequate breaks. Regular medical
examinations 'G20'.
CAUTION!
Risk of injury by hazardous substances, such as
dust and cutting water or slurry!
Failure to wear appropriate protective equipment may lead
to damage to health. Use personal protective equipment.
20
Renew the cutting water regularly. Use the dust mask.
Connect water supply.
CAUTION!
Risk of injury due to inadequate lighting.
Work in inadequate lighting conditions may lead to heavy
injuries. Provide for adequate lighting at the workplace.
WARNING:
Danger to life due to defective or bypassed
safety devices!
Inoperable, bypassed or disabled safety devices do not
protect from hazards and may lead to heavy or fatal injuries.
Before commencement of works, always make sure that all
safety devices are properly installed and functional.
Never disable safety devices.
Ensure that the safety devices are always freely accessible
WARNING:
Risk of injury due to wrong spare parts.
Wrong spare parts can seriously compromise safety and
cause damage and malfunction up to total failure.
As a matter of principle, only original spare parts must
be used. Original spare parts can be obtained via an
authorized dealer or directly from the manufacturer.
2.8 Signage
Danger from electric current!
DANGER!
Danger to life from electric current!
Touching live parts leads to death.
- Damaged insulation or individual parts can be life-
threatening. Disconnect the machine from the power
supply before any work on the electric system.
- Check ¬that no voltage is present! Switch off power supply
before maintenance, cleaning and repair operations and
secure the machine against being restarted.
- If the power supply insulation is damaged, switch off
immediately and arrange for repairs.
- Never bypass or disable fuses.
- Always use fuses with correct amperage when replacing
defective fuses.
- Keep moisture away from live parts.
- Any works on the electrical installations must be carried
out by qualified electricians¬.
- Annual check of the electric system according to VDE0701.
CAUTION!
Risk of cut injuries!
Reaching into moving tools may lead to heavy injuries.
- Do not touch rotating diamond blades in any
circumstances.
- De-energize the machine before replacing the diamond
blade.
There are the following symbols and information signs on
the machine that refer to potential dangers: