Descargar Imprimir esta página

Daitsu ACD 18U Manual De Funcionamiento página 90

Publicidad

Idiomas disponibles

Idiomas disponibles

06Manual 14Daitsu Eng
22/5/06
Before you start operating the air conditioner, set the clock of the remote contro-
ller using the procedures given in this section. The clock panel on the remote con-
troller will display the time regardless of whether the air conditioner is in use or not.
Initial Setting or the Clock
When batteries are inserted in the remote controller, the clock panel will display
"0:00" and the colon will flash.
(1) Initial Setting or the Clock
Push this button to set time.
Forward.
Backward.
Each time you push the button, the time moves forward or backward by one
minute depending on which side you Push. The time alters as quickly as you
push the button.
(2) OK button
When you push the OK button, the clock time display stops flashing and the
clock starts operating.
(3) Readjusting the Clock
Push the CLOCK button in the battery compartment, the colon in the clock dis-
play will start to flash. To set the new time, follow 1 and 2 of "Initial Setting of
the Clock".
* Clock accuracy is within 10 seconds per day.
Static electricity or other factors (in case of extremely high voltage) can cause
remote controller clock initialize. If your remote controller is initialized (flashing
of the colon in "0:00"), readjust the clock before you start operation.
88
18:20
Página 88
SETTING THE CLOCK
CAUTIONS
Clock

Publicidad

loading

Este manual también es adecuado para:

Acd 24uAcd 30uAcd 36uAcd 30utAcd 36utAcd 48ut