Descargar Imprimir esta página

Daitsu ACD 18U Manual De Funcionamiento página 97

Publicidad

Idiomas disponibles

Idiomas disponibles

06Manual 14Daitsu Eng
22/5/06
Adjust the air flow direction properly. Otherwise it might cause discomfort and
make the room temperature uneven.
Adjust the vertical air flow louver using the remote controller.
Adjust the horizontal air flow grilles manually.
Adjusting the Vertical Air Flow Direction
The air conditioner automatically adjust the vertical air flow direction in accor-
dance with the operating conditions.
To set the air flow direction you desire
Perform this function while the unit is in operation.
Keep pushing the AIR DIRECTION button on the remote controller to move the
louver to the desired direction.
Change the vertical air flow louver direction within the range indicated.
In subsequent operations, the vertical air flow is automatically set in the direc-
tion to which you adjusted the louver pushing the AIR DIRECTION button.
To automatically swing the air flow direction
Perform this function while the air conditioner is in operation.
Push the SWING button on the remote controller.
To stop the function, push the SWING button again.
To change the swing direction, push the AIR DIRECTION button.
The AIR DIRECTION and SWING buttons will be disabled when the air con-
ditioner is not in operation (including when the ON TIMER is set).
Do not operate the air conditioner for long hours with the air flow direction
set downward during the cooling or dry operation. Otherwise, condensation
may occur on the surface of the vertical air flow louver and cause dew drip-
ping.
Do not move the vertical louver manually. Always use the AIR DIRECTION
button. If you move the louver manually, it may malfunction during opera-
tion. If the louver malfunctions, stop the air conditioner once and restart it.
When the air conditioner is started immediately after it was stopped, the ver-
tical air flow louver might not move for 10 seconds or so.
18:20
Página 95
ADJUSTING AIR FLOW DIRECTION
CAUTIONS
When cooling and dehumiditying are
selected, set the
louver within
the blue
region.
95

Publicidad

loading

Este manual también es adecuado para:

Acd 24uAcd 30uAcd 36uAcd 30utAcd 36utAcd 48ut