Publicidad
Idiomas disponibles
Idiomas disponibles
E
F
2
A
B
D
4.1-2
1
C
4.1-1
D
4.1-3
4.1 Controls
Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig. 4.1-1).
A.
• Press down and release, WITH LEFT FOOT, the fi rst
pedal from the left: the clamps of the turntable will
retract. Do it again: the clamps will expand. If you press
the pedal prior to the end of the stroke and release,
the clamps may be stopped in any position.
B.
• Press down and hold, WITH RIGHT FOOT, the fi rst
pedal from the right: the turntable turns clockwise. Lift
the pedal and the turntable turns counter-clockwise.
DANGER OF LEG TRAPPING
C.
• Press down the lever to open the bead breaker arm.
• Release the lever to stop the arm.
• Pull the lever upwards to close the bead breaker arm:
by doing this the arm will move towards the machine.
D.
• The lock handle enable the mount/demount tool to be
locked in the working position. Lower the lock handle
to unlock (Fig. 4.1-2) the vertical slide, lift the handle
to lock (Fig. 4.1-3).
E.
• Turn the adjustment knob (1, Fig. 4.1-1) for positioning
mount/demount head according to rim diameter.
For machines without Tubeless wheel system:
F.
• Press bead seater/infl ator pedal on left side of the
machine (2, Fig. 4.1-1): air will come from infl ation
hose end only.
WHEN OPERATING THE INFLATOR IT IS MANDATORY
TO WEAR EAR PROTECTORS AND SAFETY GLASSES
TO PREVENT CONTAMINATION FROM NOISE, DUST
AND CHIPS BLOWN BY THE AIR JETS.
15
EN -
Publicidad
