Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
After recording
a
After recording in the sea, submerge the marine pack with
the buckles fastened thoroughly in fresh water for a while so
that the sea water is removed. Then wash it with fresh water
and dry it with a soft cloth. Clean the video camera recorder
and the inside of the marine pack with a dry soft cloth.
Do not use any type of solvent, such as alcohol or benzine
for cleaning, as this might damage the finish. Be sure to
perform the above procedure every time the marine pack is
used in the sea.
{f the sea water remains on the marine pack, the metal parts
may get rusty or the operation lever becomes hard to move.
Grease the O-ring and waterproof gasket, put them in the
grooves correctly and put the transport cover. Joint the
marine pack without fastening the buckles and place it ina
cool place.
Avoid storing the marine pack in a hot or very cold place, in a
place subject to direct sunlight or excessive dust, or together
with naphthalene or camphor. This will damage the marine
pack.
16
Specifications
Compatible equipment
U.S.A. and Canada
CCD-V11
| Other countries
CCD-V88
Material
Plastic (ABS and PC), glass
Waterproof
O-ring, 3 buckles
Usable depth
Up to 75 meters (246 feet)
Power sources
One battery pack NP-77
Underwater microphone
Peizoelectric microphone
Controllable function
Power on/off, recording start/stop, zooming,
focusing, monitoring
Dimensions
Unit: mm (inch)
FS
a
i=]
w)
N
515 (207/s)
Weight
Approx. 14.5 kg (31 Ib 15 02)
Accessories supplied
Pedestal (1)
Power connecting cord (1)
Arm (1)
Wide conversion lens (1)
Battery adaptor NPA-80 (1)
LCD color monitor XV-M3 (1)
Spare O-ring (1)
Spare waterproof gasket (1)
Grease (1)
Design and specifications are subject to change without
notice.
Publicidad
