Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
To save a favorite cycle, set
MY CYCLE
the desired setting for wash
cycle, soil level, spin speed
and wash temp settings
and hold down the My Cycle
button for 3 seconds, A beep
will sound to indicate the
cycle has been saved.
To use your custom cycle,
press the My Cycle button
before washing a load.
To change the saved cycle, set
the desired setting and hold
down the My Cycle button for
3 seconds.
You can delay the start of
DELAY
a wash cycle for up to 24
hours. Press the Delay Wash
button to choose the amount
of time you want to delay the
start of the wash cycle. Once
the desired time is reached,
press the
machine will count down and
start automatically at the
correct time.
NOTE: When using My Cycle,
wash options cannot be
modified after the cycle has
been started.
NOTE: If you change wash
Cycles before starting the
cycle, the My Cycle light
will turn off and you will be
returned to the base cycle.
NOTE: If you forget to fully
close the door, a remainder
signal will beep reminding
you to do so.
NOTE: If you open the door
when the delay is counting
down, the machine will enter
button. The
the pause state. You must
close the door and press
restart the countdown.
55
EN
button again in order to
Publicidad
