Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
SPA TUB IN AN
Extra air pressure due to strong sunlight
ABNORMAL SHAPE
Auto-off 10 minutes
Internal parts damaged
NO BUBBLE
One-way valve broken
Filter cartridge clogged by dirt or
FILTER PUMP DOES
other objects
NOT WORK
Filter system failure
Where can I find the serial number?
At the back of controller. Or at the foot of the control box.
How can I find my service contact?
* Scan the QR code below or visit https://www.the-mspa.com/after-sales.
1. Input the serial number of your spa.
2. The corresponding service provider will be displayed.
* You can find the contact information of local service center on the back of the warranty card
CONTACT YOUR LOCAL MSPA DEALER OR SERVICE CENTER FOR ANY PRODUCT-RELATED QUESTIONS OR PROBLEMS.
CAUSE
Check the air pressure and release air if necessary
During hot weather, it is advisable to check whether some air should be released to avoid
any possible damage to the spa pool.
Wait for 10 minutes and turn on the Bubble button again
Contact local MSpa Service Center
Contact local MSpa Service Center
Clean or replace the filter cartridge
Contact local MSpa Service Center
SOLUTION
16
Publicidad
