Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Sears Kenmore 385.16520000 Manual De Instrucciones

Pressure Adjusting Lever
(_ Pressure adjusting lever
The pressure adjusting lever should be set at "3" for regular
sewing.
Reduce pressure to "2" for applique, cut work, draw work
and basting.
Set pressure at "1" when sewing chiffon, lace, organdy and
other fine fabrics° Velour and knits with a lot of stretch may
also require pressure at "1"
Presser Foot Lifter
(_ Presser foot lifter
(_ Normal up position
(_) Highest position
The presser foot lifter raises and lowers the presser fool
You can raise it about 1/4" (0.6 cm) higher than the normal
up position for easy removal of the presser foot or to help
you place heavy fabric under the fool
Thread Cutter
(D Thread cutter
You do not need a pair of scissors to cut threads after
sewing° ,Just use the built-in thread cutter.
Extension Table
• Detaching the table
Pull the table away from the machine, as illustrated.
• Attaching the table
Push the extension table until it snaps into the machine,
O Extension table
(_) Projection
(_ Hole
• Accessory box
Open the cover of the accessory box toward you. Sewing
accessories are conveniently located in the box.
f
fm
¢_, ,!,
J
8