Adjust The Needle Thread Tension For Zigzag Stitch; Correct Tension; Tension Is Too Tight; Tension Is Too Loose - Sears Kenmore 385.16520000 Manual De Instrucciones

Adjust the Needle Thread Tension for Zigzag
Stitch
For an ideal zigzag stitch, the bobbin thread does not show
on the right side (Top side) of the fabric and needle thread
shows slightly on the wrong side (Bottom side) of the fabric_
See the illustrations for correct appearance,,
To match this appearance, adjust the needle tension.,
• Correct tension
0 Right side (Top side) of fabric
(_) Wrong side (Bottom side) of fabric
Minimize the amount of needle thread visible on the
wrong side (Bottom side) of fabric without causing
excessive puckering or causing bobbin thread to show on
the right side (Top side) of fabric_
Results vary with fabric, thread and sewing condition.
• Tension is too tight
0 Right side (Top side) of fabric
(_ Wrong side (Bottom side) of fabric
Corner of each zigzag pulls together on the right side of
fabric°
•Tension is too loose
(_ Right side (Top side) of fabric
® Wrong side (Bottom side) of fabric
The needle thread loops through wrong side (Bottom
side) of fabric and is pulled almost together,,
f
f
® ®
'%_ j
®
® ®
h
J
3O