Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Sears Kenmore 385.17324 Manual De Instrucciones

Pressure Adjusting Lever
0 Pressure adjusting lever
The pressure adjusting lever should be set at "3" for regular
sewing°
Reduce pressure to "2" for applique, cut work, draw work and
basting°
Set pressure at "1" when sewing chiffon, lace, organdy and
other fine fabrics Velour and knits with a tot of stretch may also
require pressure at "1".
Presser Foot Lifter
L_ Presser foot lifter
(_) Normal up position
(_) Highest position
The presser foot lifter raises and lowers the presser foot.,
You can raise it about 1/4"(0.6 cm) higher than the normal up
position for easy removal of the presser foot or to help you
place heavy fabric under the foot,,
Thread Cutter
0 Thread cutter
"Youdo not need a pair of scissors to cut threads after sewing°
Just use the built_in thread cutter,
,,,,.-
J
Extension Table
Detaching the table:
Pull the table away from the machine, as illustrated°
Attaching the table:
Puch the extension table until it snaps into the machine°
(_) Extension table
(_ Projection
_) Hole
Accessory Box
Open the cover of the accessory box toward you, Sewing
accessories are conveniently located in the box.
\