Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
INSTALLING CARTRIDGE FILTER
See Figures 41-44.
• Verify that the power cord is disconnected from
the outlet.
• Remove the power head and place in an upside-
down position.
• Install the cartridge filter over the filter cage
making sure the cage is completely covered.
• Place the filter retainer on the top of the
cartridge filter over the raised lip and tighten
down by turning the retainer clockwise; do not
over-tighten.
• Place the power head back onto the collection
tank.
FIG. 41
FIG. 42
FIG. 43
FIG. 44
REMOVING & CLEANING CARTRIDGE FILTER
See Figures 45-46.
• Remove the power head and place in an upside-
down position.
• Unlock and remove the filter retainer by turning
the retainer handle counterclockwise, carefully
remove the cartridge filter from the filter cage.
• Clean the cartridge filter by gently tapping or
brushing dirt off. Cleaning should not be done
indoors in living areas. For optimal performance
a new filter is recommended.
FIG. 45
FIG. 46
13 English
Publicidad
