Sleep Timer - Teac CR-H238i Manual Del Usuario

Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again to restore the
sound.
< When muting is engaged, "MUTING" appears on the
display.
< If you change the volume when muting is engaged,
the muting will be cancelled.

Sleep Timer

The power can be switched off after a specified
amount of time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP 90 (60, 30, 20, 10)
The power will be switched off 90 (60, 30, 20,10)
minutes later.
SLEEP OFF
The sleep timer is off.
< The display is dimmed when you set the sleep timer.
< If you want to check the remaining time, press the
SLEEP button once. The remaining time will be
displayed for 3 seconds, then return to the normal
display.
Headphones
For private listening, first reduce the volume level to
minimum. Then insert the plug of your headphones
into the PHONES jack, and adjust the volume using the
VOLUME knob.
The sound from the speakers and subwoofer is cut off
while the headphones are connected.
CAUTION
Always lower the volume level prior to connecting
your headphones. TO AVOID DAMAGING YOUR
HEARING, do not put on your headphones until after
you have connected them.
VOLUME
19